Edge of Arlington offers free shipping in the United States when you choose flat rate shipping

Application: Cuts Thin Aluminum & Other Non-Ferrous Metals

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass, and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with non-ferrous metals than with cutting wood. With this in mind, for this blade, Freud formulated a special carbide with high impact strength. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance. Freud-Made TiCo™ Carbide specifically designed to cut non-ferrous metals extends tooth life. Positive Hook Angle produces a smoother cut with less material distortion and burr-free cuts. Silver Ice™ Coating resists corrosion and pitch buildup.

Ideal For: Cutting Thin Aluminum & Other Non-Ferrous Metals. Wall thickness 1/8" Max.

Tip: To determine if the metal you wish to cut is non-ferrous, hold the metal next to a magnet. If it attracts the magnet, it is a non-ferrous metal and should not be cut with a non-ferrous blade.

1 - 2 of 2 | Results Per Page | View | Unit of Measure
Clear Filter


Arbor (in)

  • 1
  • 5/8

Item #








Add To Cart/Request Quote
LU90M010 N/A Silver Ice™ N/A 10 in N/A 100 TCG N/A 5/8 in N/A .110 in N/A .087 in $117.29 Add To Cart
LU90M012 N/A Silver Ice™ N/A 12 in N/A 120 TCG N/A 1 in N/A .118 in N/A .098 in $146.90 Add To Cart
1 - 2 of 2 | Results Per Page | View | Unit of Measure
Site created by Thomas Web Solutions and powered by Navigator Platform            © 2016, Edge of Arlington Saw & Tool, Inc.