Edge of Arlington offers free shipping in the United States when you choose flat rate shipping.
This two-piece bit set provides an economical way to create your own edge banding from the wood of your choice. A great way to create a finished edge on plywood or MDF panels and shelves, which blends perfectly with the rest of your project.
Using this bit set is simple, too. Just position each bit so that it is centered on the stock thickness and make the cut. For best results, we recommend that you cut the edge band stock slightly oversized and then flush trim it after assembly.
This unique set is available in two styles: 90° or 60°. The 90° bits can also be used to create V-grooves or double-sided chamfers, while the 60° set creates a larger surface area for glue.
Carbide-tipped for long life. For stock 3/4" to 1" thick.
For use only in a table-mounted router.
Replacement bearing for #55466 use (2) #47720
Replacement bearing for #55468 use (1) #47720 and (1) #47718
|Quantity||Add To Cart/Request Quote|
|55466||N/A 1 25/32 in||N/A 1 13/16 in||N/A 1 1/32 in||N/A||N/A 90 º||N/A 2||N/A 1/2 in||N/A 2 21/32 in||$141.90||
Add To Cart
|55468||N/A 1 19/32 in||N/A 1 45/64 in||N/A 1 in||N/A 5/32 in||N/A 60 º30º (a1)||N/A 2||N/A 1/2 in||N/A 2 5/8 in||$141.90||
Add To Cart