Edge of Arlington offers free shipping when you choose flat rate shipping

Material Finish-Top: Excellent
Material Finish-Bottom: Poor

Crescent Points are good for both plunging and flat bottom cutting.

1 Flute routers are a good choice for soft materials. They provide a good finish, and are capable of faster feed rates.

Downcut routers produce the best finish to the top of the material. Chips flow in a downward direction.

Spiral routers should only be used in automatic feed operations. They are good for use on all materials.

1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Cutting Diameter

Cutting Length

Shank Diameter

Overall Length

Helix Angle

End Point Type

Manufacturer

Price

Add To Cart/Request Quote
N/A 1/8 in N/A 1/2 in N/A 1/8 N/A 2 in N/A 22º N/A Crescent N/A Mastercut $17.34 Add To Cart
N/A 1/8 in N/A 1/2 in N/A 1/4 N/A 2 in N/A 22º N/A Crescent N/A Mastercut $19.25 Add To Cart
N/A 5/32 in N/A 9/16 in N/A 1/4 N/A 2 in N/A 22º N/A Crescent N/A Mastercut $18.79 Add To Cart
N/A 3/16 in N/A 5/8 in N/A 3/16 N/A 2 in N/A 22º N/A Crescent N/A Mastercut $17.83 Add To Cart
N/A 3/16 in N/A 5/8 in N/A 1/4 N/A 2 in N/A 22º N/A Crescent N/A Mastercut $19.25 Add To Cart
N/A 7/32 in N/A 3/4 in N/A 1/4 N/A 2 1/2 in N/A 22º N/A Crescent N/A Mastercut $18.79 Add To Cart
N/A 1/4 in N/A 3/4 in N/A 1/4 N/A 2 1/2 in N/A 22º N/A Crescent N/A Mastercut $19.25 Add To Cart
N/A 1/4 in N/A 1 1/4 in N/A 1/4 N/A 3 in N/A 22º N/A Crescent N/A Mastercut $22.67 Add To Cart
N/A 3/8 in N/A 1 1/8 in N/A 3/8 N/A 3 in N/A 22º N/A Crescent N/A Mastercut $33.17 Add To Cart
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 
Site created by Thomas Web Solutions and powered by Navigator Platform            © 2016, Edge of Arlington Saw & Tool, Inc.