Edge of Arlington offers free shipping in the United States when you choose flat rate shipping

See illustration images for more information.
Freud's Shaper Cutters can be fitted with bushings to allow the use of 1 1/4" bore cutters on spindles as small as 3/4". Single cutters require the use of a pair of flange bushings in the appropriate bore in order to lock the cutter onto the spindle. Multiple cutter stacks such as stile and rail cutter sets require flange bushings as well as center cutter bushings. To determine which bushings are required, first determine the total thickness of the stacked cutter hubs, which is often equal to carbide height, and subtract the height of both flange bushings. The result is the maximum total height of center bushings required. Select bushing sizes that equal most nearly to this amount.

Important: Never use center bushings that will equal or exceed the maximum total center bushing height.

Use these bushing sets with the Cassette 65 Cutter Set. Be sure to clean the cutter, bushing, and spindle prior to assembly.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Outside Diameter

Height (H)

No. of Pieces

Bore Diameter (d)

Manufacturer

Price

Add To Cart/Request Quote
N/A 1 1/4 in N/A 15/64", 9/32", & 3/8" N/A 3 N/A 1 1/8 in N/A Freud $24.96 Add To Cart
N/A 1 1/4 in N/A 15/64", 9/32", & 3/8" N/A 3 N/A 1 in N/A Freud $24.96 Add To Cart
N/A 3/4 in N/A 15/64", 9/32", & 3/8" N/A 3 N/A 5/8 in N/A Freud $24.96 Add To Cart
N/A 3/4 in N/A 15/64", 9/32", & 3/8" N/A 3 N/A 1/2 in N/A Freud $24.96 Add To Cart
N/A 1 1/4 in N/A 15/64", 9/32", & 3/8" N/A 3 N/A 30 mm N/A Freud $17.44 Add To Cart
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 
Site created by Thomas Web Solutions and powered by Navigator Platform            © 2016, Edge of Arlington Saw & Tool, Inc.